Unique Situations
What if my bike is a little bit different?
What if my bike is a little bit different?
Thousands of families are out adventuring, enjoying Ride More seats on a host of different bikes. However, there are a few unique situations to consider.
Sometimes spacers are not round on the outside, but they are standard 1 ¹/⁸" circular on the inside. In this case, the bike is still Ride More compatible. Existing spacers and the Ride More front mount might not look tidy on the outside, but functionally, all is well and you are good to roll!
Some bikes, like Rad Power models, have a cone shaped spacer under the stem. Swap this spacer for a shorter cone shaped one to make room for the Ride More front mount. Customers find these shorter spacers at their local bike shop (we don't sell them at Ride More). Read more about this solution here.
If you have spacers that are hex shaped on the outside, but round on the inside, your bike is Ride More compatible! BUT, your spacers likely have notches on them to help stack, and these need to be filed off so the Ride More spacer sits flush.
Sometimes, bikes have cables that run internally through the steerer tube. If they pop out early enough, you might be good to roll (see photo - yay!). But if they run all the way through the top, Ride More seats are a no go.
Email info@mac-ride.com with questions!